多复变中Dp和H∝及βp空间的一些关系

在 Cⁿ中的单位球上, 讨论了Dirichlet 型空间D_p和广义Bloch空间β^q的相互包含关系以及D_p 和Hardy空间H^∝之间的点乘子,根据 p 的一些不同情形对M(H^∝, D_p ) 和 M( D_p , H^∝) 进行了刻划.     

Formation of the inclusion complex of Orange II with β-Cyclodextrin and its photostability

Inclusion complex of Orange II with β-Cyclodextrin (β-CD) and the anti-photolysis effect under UV-light were investigated. The molar ratio of inclusion complex of β-Cyclodextrin and Orange II is 1∶1. The formation constantK = 1.236×10³ L/mol was determined by the UV and Fluorescence spectra respectively, which was quite in accordance with the calculation with a modified Benesi-Hildbrand equation. The inclusion complex was characterized by the IR spectra and the molar ratio of inclusion complex is 1∶1 too. The formation constantK = 1.266×10³ L/mol was determined by¹H NMR analysis and was nearly the same by UV and fluorescence spectra. The photocatalytic decolorization rate of Orange II solutions containing β-CD and TiO₂ was smaller by 51.9% than that of the Orange II solutions only containing TiO₂, while in the case of direct photolysis of Orange II solutions, β-CD can lower the photolysis rate by 48.1% under UV-light. This result indicates β-CD can inhibit the photolysis and photocatalytic decolorization of Orange II under UV-light. The β-CD inclusion complex was found to be persistent to UV-light photolysis. Foundation item: Supported by the National Natural Science Foundation of China (20177017) Biography: Lu Ping (1958), male. Associate professor, research direction: environmental photochemistry.     

微纳米活性复合矿物橡胶助剂的研制

根据白炭黑性能及其在钢丝绳橡胶运输带中作粘合助剂的机理分析研究,通过"矿物/表丽活性剂/橡胶"三相化学界面设计,复合利用多种非金属矿物,并将其超细粉碎至微纳米级粉体,经表面化学改性,研发成功白炭黑等量替代产品,并实现了产业化.提出了微纳米复合矿物粉体经表面设计及化学改性,可以作为橡胶粘合助剂产品的理论和一条工艺技术路线.     

4,4''''-联苯二甲酸乙醇溶剂化物的晶体结构:包结客体溶剂分子的三维微孔晶格

利用X-射线单晶衍射技术在室温下测定了4,4’-联苯二甲酸乙醇溶剂化物(H2bpa).(ethanol)的晶体结构.结果表明,标题化合物处于三斜晶系,P-1空间群,晶胞参数为:a=1.110 6(1)nm,b=1.227 6(2)nm,c=1.248 8(2)nm,α=103.565(2)°,β=108.187(2)°,γ=97.013(2)°,V=1.536 8(3)nm3,Z=4.晶格中存在两个结晶学独立的H2bpa分子,它们分别通过各自羧基间所形成的分子间双氢键桥相连接,形成两种具有不同延伸方式和取向的一维链状结构,这些一维链相互分离且呈交叉排列,从而构成了具有一维通道的三维微孔主体晶格,客体乙醇分子包结在其中,且与H2bpa分子之间存在氢键相互作用.     

西汉狮子山楚王陵出土玉器中的石墨包裹体

利用激光拉曼光谱技术,研究了徐州狮子山西汉楚王陵出土的部分玉衣片和玉棺片中的黑色点状固体包裹体。拉曼光谱谱图显示其主要的拉曼散射峰位于1360("D"峰)、1582("O"峰)、2440、2735、3250cm-1附近,与石墨拉曼散射峰的典型峰位一致,显示黑色包裹体为石墨。石墨拉曼光谱中的"D"峰和"O"峰的相关信息可敏感地反映其主岩的形成条件,因此对古玉器玉料中石墨包裹体拉曼光谱的深入研究可以对玉料的产地来源进行限定。     

A-单调映象的广义隐拟变分包含

本文引入了一类A-单调映象的广义隐拟变分包含问题,利用A-单调映象的预解算子技巧研究了这类变分包含解的迭代算法逼近,证明了其解的存在性以及由算法生成的迭代序列的收敛性。     

Research of Inclusion Complexation of 4,4＇-Thiodiphenol Effected by β-Cyclodextrin in Aqueous Solutions and the Effect on Photodegradation

The inclusion behavior of 4, 4＇ -Thiodiphenol （TDP）, a typical bisphenol and endocrine disruptor, reacts with β-cyclodextrin （β-CD） in aqueous solutions has been investigated by means of UV absorption spectrum and quantum-chemical calculation with Gaussian 98 software. The results show that the inclusion behavior of TDP is quite different in acidic solutions （pH 5.9） from that in alkaline solutions （pH 10.0）. This behavior difference is attributed to the different formula structures in aqueous solutions at acidic and alkaline pH values that are demonstrated by quantum- chemical modeling and calculation. TDP forms a 1 ： 1 fl-CD inclusion complex in aqueous solutions. The equiiibrium constant K was calculated to be 553.49 L/mol at pH 5.9 and 1 318.20 L/mol at pH 10.0 respectively for the inclusion complex reaction by using the modified Benesi-Heldbrand equation. After inclusion TDP＇s structure is changed especially at the inclusion part with the bond order becoming larger, which results in inhibitive photodegradation during direct photooxidation and H2O2 assisted photooxidation.     

3a0．6Sr0．4TiO3／MgO／Mg2SiO4复相陶瓷的制备与介电可调性能

采用标准电子陶瓷工艺，制备了Ba0．6Sr0．4TiO3／MgO／Mg2SiO4复相陶瓷（MgO和Mg2SiO4按相同重量加入），研究了MgO和Mg2SiO4含量对复相陶瓷微观结构、介电性能及介电可调性的影响．结果表明，随着MgO和Mg2SiO4含量的增加，陶瓷的晶粒尺寸略有增大，低频（100kHz）介电常数、介电损耗、介电可调度和介电常数温度系数降低．随着偏置电场的增强，介电常数降低，介电损耗变化不大（均在10^-3量级）．当MaO和Mg2SiO4的百分含量均为30％时，获得了室温介电常数为101．6、介电损耗为0．0017及1．79kV／mm偏置电场下介电可调度为12．19％、介电常数温度系数为0．009℃^-1的介电性能。     

碳酸盐岩流体包裹体(NaCl-H2O)的合成及捕获机理分析

对碳酸盐岩原生、次生流体包裹体的形成机理进行了分析，并分别在压力为100MPa、温度为400—300℃和350℃条件下，利用高温高压釜合成了碳酸盐岩原生、次生流体包裹体（NaCl-H2O），模拟了包裹体的形成过程，并利用激光拉曼光谱及显微测温技术对合成包裹体的成分、均一温度、盐度等参数进行了定量分析。结果表明，合成的原生、次生包裹体气相与空气成分相符，其均一温度分别为372．8℃和321．02℃，盐度分别为23．22％和19．54％．与实验前设定的条件相符，从而验证了合成包裹体的准确性，并为进一步分析包裹体相态奠定了基础。